A 2013 Honda Accord Coupe with the limited-edition HFP package debuted at the 2012 SEMA show along with a Bisimoto-tuned Accord Coupe V-6 and a four-cylinder Accord sedan customized by DSO Eyewear/MAD Industries. See photos of all three cars in the gallery below.
The HFP package for the 2013 Accord Coupe features a bodykit with front, side, and rear pieces and deck lid spoiler, a sport suspension that lowers the midsize coupe 0.6 inches, 19-inch alloy wheels, as well as badges on the trunk lid and front fenders. Inside, HFP floor mats and red interior lighting complete the package. Only 500 examples of the $4650 HFP package (price excludes installation) will be available for the 2013 Accord Coupe next spring.
Bisimoto Engineering 2013 Honda Accord Coupe Grand Touring
Bisimoto Engineering has boosted the output of the 2013 Honda Accord Coupe’s V-6 engine from 278 hp to 401 hp with a Nitrous Express (NX) nitrous oxide kit and Bisimoto cat-back exhaust system with Burns Stainless mufflers. The coupe’s suspension has been updated with new coil springs and sway bars while a roll cage has been added to stiffen the chassis. Buddy Club supplies new brake calipers and rotors as well as 19x9.5-inch alloy wheels wrapped in 245/40/19-inch rubber.
The exterior of the Accord Grand Touring concept was designed by Denmatic and features a Gatorwrap exterior body wrap that covers the HFP bodykit. Inside, occupants sit in Bisimotwerks GT3 racing seats.
Here is the full list of modifications to the Bisimoto Engineering 2013 Honda Accord Coupe Grand Touring:
- Nitrous Express (NX) wet shot chemical supercharger system
- NGK Iridium spark plugs
- PurOl "Elite Series" Synthetic Motor Oils
- Bisimoto Cat-back exhaust system
- Burns Stainless mufflers
- Bisimoto 360 degree Oil Cap
- JNF Chromoly roll cage
- Progress coil suspension and sway bar
- Buddy Club P1 Racing II Plus 19x9.5 aluminum wheels
- Falken Azenis FK453 245/40ZR-19 tires
- Buddy club P1 Racing lug nuts
- Buddy Club Racing Spec Monoblock Calipers
- Buddy Club Racing Spec Brake Rotors
- Gatorwrap custom laminated body wrap
- Bisimoto Accord GT Decal Pack kit
- Bisimoto Accord GT Ghost Emblem Kit
- Denmatic design scheme
- Honda Factory Performance (HFP) side skirts, rear and front fascia kit
- Carbon Creations GT Concept 2 Wing
- Bisimotowerks GT3 racing seats
- Bisimotowerks Leather wrapped, hand stitched roll cage
- Bisimoto reservoir socks
- G&J braided lines
DSO Eyewear and MAD Industries created this 2013 Honda Accord EX sedan, which is powered by a 2.4-liter four-cylinder mated to a CVT. An Eibach Pro-Kit lowering springs reduce the Accord sedan’s ride height by 1.0 inch in front and 1.5 inches in the rear while the dual exhaust from a 2013 Accord Sport enhances engine breathing. The Accord sits on 20x8.5-inch Mallory alloy wheels with a matte black finish from TSW Wheels wrapped in 255/35/20 tires
The exterior wears White Orchid Pearl paint with a Matte Blue Metallic wrap from 3M and a Honda X-Package body kit. Inside, Katzkin Leather covers new seating surfaces, door trim, the pillars, and the headliner. Matching 3M wrap also covers select interior pieces. Lightning Audio amplifiers and speakers enhance the Accord’s sound system.
Here is the full list of modifications to the 2013 Honda Accord Sedan by DSO Eyewear / MAD Industries:
Genuine Honda Accessories:
- Aerodynamic styling created by X-Package with a sporty, low-profile custom look
- LED Illuminated Stainless door sill trim
- K&N high-performance air filter
- AMSOIL dominator motor oils
- Odyssey extreme battery
- Dual Exhaust System from 2013 Accord Sport model
- Eibach: Pro-Kit Performance Springs front and rear, Lowers vehicle 1.0" – 1.5" with Progressive Spring Design for Excellent Ride Quality
- MGP: Custom Satin Black Caliper Covers provides an excellent brake appearance upgrade
- Falken Tire: AZENIS FK 453 255/354ZR20 the Ultimate Performance Tire
- TSW Wheels: Mallory Alloys Matte Black Wheels 20"x 8.5"
- 3M 1080 Scotchprint Wrap Film: Matte Blue Metallic Personalized Vehicle Graphics
- Sticky Fingers Design: installed the Matte Scotchprint wrap
- BASF RM Onyx HD waterborne: DC5800 Clear coat
- PIAA: 9006 (low beam), 9005 Extreme White Bulbs (high beam),
- H11 fog lamp, bulbs Tera LED Dome Light Bulbs
- Katzkin Leather Interiors: Midnight Tuscany Leather with Raven Black Perforated Suedezkin inserts appointed with Cream Bone Accent Suedezkin seat insert with matching contrast stitching that sets a luxury upgrade to the seats. Interior appointed items were covered in Bone Suedezkin with Tuscany accents in door panels inserts. The complete Headliner, pillars, package tray were covered in Bone and Raven Black Suedezkin
- 3M Wraps Interior Parts: selected interior parts in matching 3M Scotchprint Wrap Film to tie in the exterior theme.
- Lighting Audio: Competition Grade Audio – System specs LA-4100 4 Channel Amplifier provides 800 watts of RMS power drives a set of LA-1654 series full-range separates, driving the base is a LA- 400 Mono Amplifier to a set of LA-S410 10" Shallow Sub Woofers are hidden. Lightning Audio Premium Speaker wire.
- SRP Racing pedals: Billet aluminium anodized racing pedals
- Escort Inside: 9500IX Radar-Laser-Safety Camera- Detector
- Coverking: Stain Stretch custom interior car cover
- Signature Wheel and Tire: Provided mounting and balancing
- Enfotrace: GPS Tracking System keeps tabs of the location in real-time online via interactive tracking system
- Mothers: Polishes – Waxes – Cleaners