'11 Jeep Wrangler Recalls
| Recall Date: |
MAR 01, 2011 |
| Component: |
POWER TRAIN:AXLE ASSEMBLY |
| Model Affected: |
WRANGLER |
| Potential Units Affected: |
18326
Recall Details
|
Recall Date:
MAR 01, 2011
Model Affected:
2011 JEEP WRANGLER
Summary:
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010-2011 JEEP WRANGLER VEHICLES MANUFACTURED FROM JULY 12, 2010, THROUGH SEPTEMBER 10, 2010. SOME VEHICLES MAY EXPERIENCE A DEGRADATION OF FASTENER TORQUE FOR VARIOUS FRONT AND REAR AXLE ATTACHMENTS TO THE CHASSIS MODULE.
Consequence:
THIS COULD RESULT IN NOISE, OR ULTIMATELY, DEGRADATION IN STEERING AND HANDLING CHARACTERISTICS WHICH COULD LEAD TO LOSS OF DIRECTIONAL CONTROL OF THE VEHICLE INCREASING THE RISK OF A CRASH.
Remedy:
DEALERS WILL RE-TORQUE ALL NINETEEN FASTENERS TO THE MAXIMUM RESIDUAL TORQUE VALUES. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 24, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Potential Units Affected:
18326
Notes:
CHRYSLER GROUP LLC L09
| Recall Date: |
MAY 07, 2013 |
| Component: |
AIR BAGS |
| Model Affected: |
WRANGLER |
| Potential Units Affected: |
5440
Recall Details
|
Recall Date:
MAY 07, 2013
Model Affected:
2011 JEEP WRANGLER
Summary:
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 Jeep Wrangler right-hand drive vehicles manufactured February 1, 2007, through October 10, 2011. The affected vehicles have airbag clockspring assemblies that could experience broken airbag circuits.
Consequence:
In the event of a crash necessitating airbag deployment, a broken electrical circuit in the airbag clockspring wiring assembly can lead to non-deployment of the driver-side frontal airbag and will not be able to properly protect the driver, increasing the risk of injuries.
Remedy:
Chrysler will notify owners, and dealers will replace the clockspring and add a steering wheel dust shield, free of charge. The recall is expected to begin May 2013. Owners may contact Chrysler at 1-800-247-9753. This recall supercedes NHTSA recall 11V-528. Chrysler's recall campaign number is M31.
Potential Units Affected:
5440
Notes:
Chrysler Group LLC M31
| Recall Date: |
NOV 02, 2011 |
| Component: |
AIR BAGS:FRONTAL |
| Model Affected: |
WRANGLER |
| Potential Units Affected: |
5437
Recall Details
|
Recall Date:
NOV 02, 2011
Model Affected:
2011 JEEP WRANGLER
Summary:
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2012 RIGHT HAND DRIVE (RHD) JEEP WRANGLER VEHICLES MANUFACTURED FROM FEBRUARY 1, 2007, THROUGH OCTOBER 10, 2011. SOME VEHICLES MAY BE EQUIPPED WITH DRIVER'S AIRBAG CLOCKSPRING ASSEMBLIES THAT COULD EXPERIENCE A COMPROMISED AIRBAG CIRCUIT RESULTING IN AN AIRBAG LAMP ILLUMINATION, WHICH INDICATES THAT THE AIRBAG MAY NOT DEPLOY.
Consequence:
A BROKEN ELECTRICAL CIRCUIT IN THE AIRBAG CLOCKSPRING WIRING ASSEMBLY CAN LEAD TO NON-DEPLOYMENT OF THE DRIVER FRONTAL AIRBAG AND WILL NOT BE ABLE TO PROPERLY PROTECT THE DRIVER IN THE EVENT OF A CRASH, INCREASING THE RISK OF INJURIES.
Remedy:
CHRYSLER WILL NOTIFY OWNERS AND REMEDY THE VEHICLES AS NECESSARY FREE OF CHARGE. CHRYSLER WILL MAIL TO OWNERS AN INTERIM NOTIFICATION DURING MARCH 2012. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Potential Units Affected:
5437
Notes:
CHRYSLER GROUP LLC L37
| Recall Date: |
JUN 08, 2011 |
| Component: |
STEERING:COLUMN |
| Model Affected: |
WRANGLER |
| Potential Units Affected: |
11096
Recall Details
|
Recall Date:
JUN 08, 2011
Model Affected:
2011 JEEP WRANGLER
Summary:
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET.
Consequence:
A MISSING OR INCORRECTLY INSTALLED RIVET COULD COMPROMISE THE ABILITY OF THE STEERING COLUMN TO SUPPORT THE OCCUPANT LOADS IN THE EVENT OF A FRONTAL CRASH, DECREASING THE EFFECTIVENESS OF THE FRONTAL IMPACT SAFETY SYSTEM. AS A RESULT, THE CONDITION MAY INCREASE THE POTENTIAL FOR INJURY IN A FRONTAL CRASH.
Remedy:
DEALERS WILL INSPECT FOR RIVET PRESENCE AND ALIGNMENT AND REPAIR THE STEERING COLUMN PIVOT AS REQUIRED, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 4, 2011. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Potential Units Affected:
11096
Notes:
CHRYSLER GROUP LLC L23
| Recall Date: |
FEB 25, 2013 |
| Component: |
EQUIPMENT |
| Model Affected: |
WRANGLER |
| Potential Units Affected: |
15836
Recall Details
|
Recall Date:
FEB 25, 2013
Model Affected:
2011 JEEP WRANGLER
Summary:
Quadratec, Inc. is recalling certain aftermarket accessory, driver-side, Ultimate Floor Liners part numbers 14254.0301 07, 14254.0301 08, 14254.0301Q, 14254.0302 07, 14254.0302 08, 14254.0302Q, 14254.0303 07, 14254.0303 08, 14254.0303Q, 14254.0309 07, 14254.0309 08, and 14254.0309Q sold from May 1, 2012, through February 14, 2013. The liners are for use in 2007-2013 Jeep Wranglers. The anchor point for the affected floor liners may tear during use, particularly when exposed to high temperatures. The tearing may allow the floor liner to shift forward.
Consequence:
If the liner shifts forward it may impede the operation of the accelerator and possibly lead to unintended acceleration, which may increase the risk of a crash.
Remedy:
Quadratec will notify owners and either exchange the liners or provide them with a hook guard kit to help secure the driver-side mat, free of charge. The recall is expected to begin in March 2013. Owners may contact Quadratec at 1-800-463-2998 or info@quadratec.com.
Potential Units Affected:
15836
Notes:
Quadratec, Inc. 13-01